Vehicles

sonett - replacing spark plug wires

Still having hesitation issues I decided to replace the spark plug wires. I installed Taylor 8 MM Spiro-Pro wires. It is a universal kit for a 4 cylinder. The wires are plenty long for the Sonett. The kit I used was 78337. They are orange with 90 degree boots all around. The 90 degree boots are required for the distributor connections and two of the plugs. The remaining two plugs normally use straight connections but work fine with 90s.

The wires seem to be very high quality and the color is just about matches the orange of the Sonett.

Pictures

Preview Image Size
SmllMedLrg
SmllMedLrg
SmllMedLrg
SmllMedLrg
SmllMedLrg
SmllMedLrg
they goofed and shipped straight crimp on connectors with kit.
SmllMedLrg
SmllMedLrg
I had to contact them to get the correct 90 degree connectors. They included a sticker for my time
SmllMedLrg
All done
SmllMedLrg
no wires touch
SmllMedLrg
coil wire is close to cylinder #1 plug but still an air cap
SmllMedLrg
I used a 90 connector for the coil plug rather than straight. makes the install cleaner
SmllMedLrg
SmllMedLrg
its very tight under the air cleaner. I don't like how the wires touch the air cleaner
SmllMedLrg
nothing can be done about that, thats the way saab designed it, very tight fit

Add Picture Comments
Contact Us | ©2014 Me | Page best viewed with Chromium